[EMU] Ootake 2.95 - Forum Gametronik
IPB

Bienvenue invité ( Connexion | Inscription )

 
Reply to this topicStart new topic
> [EMU] Ootake 2.95, Emulateur PC Engine/PC Engine CD/TurboGrafx-16/SuperGrafx
shu
posté 07/02/20 - 22:26
Message #1


Sauveur de princesses
********

Groupe : Admin

Messages : 10 471
Inscrit : 21/10/04
Lieu : Vendée
Membre no 3 370
GTrons: 468610



Ootake 2.95

PC Engine/Turbo Grafx-16




Voici une nouvelle release pour Ootake, émulateur NEC PC Engine/PC Engine CD/TurboGrafx-16/SuperGrafx sous Windows développé par Kitao Nakamura, qui passe en version 2.95.

Changelog :

Citation
2020/02/07 2.95 released

- "Windows Pad Order" has been added to the pad setting screen. When
connecting two or more Windows Gamepads, you can set which pad is assigned
with the highest priority. Use this when the second and subsequent pads
are connected, and the priority of the pad that was originally changed is
lowered and the setting is shifted.
- "Overscan TV Mode" has been added to the "Screen" menu. Since v2.92, the
aspect ratio is displayed more accurately, but black belts are displayed on
the left and right in the 256 dot horizontal mode. When this menu is
selected, the black belt display part can be eliminated and the left and
right full window display (similar to Ootake before v2.91) can be made.
However, 6 dots at the bottom of the screen are hidden to maintain the
aspect ratio.
Originally, "6 dots at the bottom of the PC Engine screen" is rarely used
for important displays, and most games can be displayed without any
problems. I think that many old CRT televisions for home use had a display
in this range. Use it when you want to play in that atmosphere or when you
want to capture with the left and right filled when capturing the screen.
You can also switch this by pressing the [F11] key.
- "Adjust TV Top-Position" has been added to the "Screen" menu. In
"Overscan TV Mode", you can adjust the vertical display start position. It
can also be adjusted by pressing the [Ctrl]+[F11] keys multiple times.
- The shortcut key of the overscan area display was changed from [F11] key to
[F12] key. [Ctrl]+[F12] key can also be used to display the overscan area
of top only.
* [F11] key switches overscan TV mode.
* If you want to switch to full screen, press [Alt]+[Enter] key.
Also, when displaying the overscan area, only the top and bottom areas are
displayed by default.
- When pressing [F12] key while pressing [Ctrl] key, only the top part is
displayed in the overscan area.
- "Start Overscan TV Mode" has been added to "Setting->Screen" menu. Use this
mode when you want to switch to overscan TV mode (the viewing range is as
narrow as an old home TV) from startup.
- Cleaned up the "Capture" menu. Also, screenshot size and drawing method are
displayed in the menu.
- "Overscan display state" is not restored during normal state loading. It
restores only when loading resume(Turn on the "File->Set Resume" menu).
- When switching overscan area display ([F11] key) in window mode, if the
window is below the center of the desktop screen, the window position after
switching is adjusted to the bottom side.
- In the audio graph display ([9],[0] keys), in some games, the yellow graph
remained even when the DDA sampling sound was muted. This problem has been
corrected.
- Fixed the problem that the pad was not reflected when changing the gamepad
while Ootake was running when setting the gamepad.
- "1366x768" was added to the FullScreen resolution setting menu field.
- "FullScreen 640x480 60Hz" in the "Screen" menu (for switching to full
screen mode with any PC environment) has been changed to
"FullScreen 800x600 60Hz". Also, at the time of execution, the drawing
method is returned to the default(Direct3D).
- When switching to full screen ([Alt]+[Enter] key), the screen is switched
stably even in a PC environment where the available memory is low.
- Fixed a bug (from v2.92) that it display was shifted in a game that can
play with 4-split display.
- The speed and timing have been made closer to those of the real machine.
In "Chibi Maruko Chan", solved the problem that the display of the raster
interrupt part was distorted when clearing the stage.
- Fixed a bug that recording of the play record function (
"Capture->Play Record" menu) was not performed correctly at some games.
- Other minor details have been fixed and improved.



Site officiel : http://www.ouma.jp/ootake/

Section PC Engine (Goodset)
Set No Intro PC Engine/TurboGrafx-16
Set No Intro SuperGrafx
Section PC Engine CD


--------------------

**************************************************************




La Légende renait le 19/11/2019 !

Go to the top of the page
 
+Quote Post
sneazzy95
posté 10/02/20 - 18:36
Message #2


Recrue


Groupe : Members
Messages : 6
Inscrit : 26/11/19
Membre no 72 715



Je la trouve pas mal intéressante cette nouvelle release, merci pour le partage
Go to the top of the page
 
+Quote Post

Fast ReplyReply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 



RSS Version bas débit Nous sommes le : 24/02/20 - 08:50